Forged D-Rings


All D-Rings Clips are weldable. All D-Rings and Clips can be forged in Canton, Ohio-if this is desired please note on order. This is subject to different lead times.

2327219

1/2" B-Clip

1/2" A-Clip

Part # Model
Dimensions
Clip Style
Max. Capacity
Wt.
A B C S.W.L. M.B.S.
  2330226 3/8" D-Ring 3/8" 2-5/8" 2" A 3,000 - 0.5
  2327219* 1/2" D-Ring 1/2" 2-1/4" 2-1/2" A or B 4,000 12,000 1
  2328220 5/8" D-Ring 5/8" 3" 3" A or B 6,000 19,000 2
2022167 5/8" D-Ring 5/8" 2-3/4" 3-1/2" A or B 6,000 19,000 2.25
  2022168 3/4" D-Ring 3/4" 3" 3" A 9,000 27,000 4.25
  2329221 1" D-Ring 1" 3" 3" A or B 15,000 47,000 4.5
  2330222 1" D-Ring 1" 3" 4" A or B 15,000 47,000 5

*B-Clip for ½" D-Ring has two ½" square holes for mounting.

TO AVOID INJURY – PLEASE READ CAREFULLY

For all products: To prevent injury or vertical damage, the mounting location must be at least capable of supporting 15% more than the maximum amount to be pulled. Installation: Consult Department of Transportation regulations for procedure.

D-Rings are not to be used for lifting, they are strictly for securing loads.

SAFE WORK LOAD LIMIT (S.W.L.) – The maximum load in pounds which should ever be applied. Working load limit applies to a new product and assumes that the load is applied with even tension.

MAXIMUM BREAK STRENGTH (M.B.S.)– The maximum force in pounds at which the product, in the condition it leaves the factory, has been found by testing to break. This is for acceptance purposes only and the SAFE WORK LOAD LIMIT is still the greatest load that should ever be applied


Bent D-Ring


  • D-Ring bent at 50 degree angle
Part # Model
Max Capacity
Clip Style Wt.
S.W.L. M.B.S.
2330223 1" 5"x6" 15,000 47,000 A or B 5

Swivel D-Ring



Part # Description
Max Capacity
Wt.
S.W.L. M.B.S.
2330229D D-Ring and Assembly 15,000 - 8
2330229 Assembly Only NO D-RING 15,000 - 4